Can you use regular sewing thread for machine embroidery?

The usual warning is that sewing thread is too thick and too weak for an embroidery machine. The makers' own figures say it is about 11 percent heavier per meter than 40 wt embroidery thread, and one sewing thread maker lists machine embroidery as a use. Here are the numbers side by side, where all-purpose thread does a fine job, and where it shows.

Updated 7 min read Reviewed against our editorial standards

Quick answer

Yes, within limits. All-purpose polyester such as Gütermann Sew-all or Coats Dual Duty XP is Tex 30; 40 wt embroidery thread such as Madeira Polyneon is dtex 135 x 2, which is Tex 27. That is about 11 percent heavier, not a different class. Use it for test stitch-outs, run-stitch and redwork, or an exact garment color, with a 70 to 90 needle. Keep it out of dense satins, where its spun or low-sheen finish shows.

On this page
  1. The short answer: yes, and size is not the problem
  2. Sewing thread vs embroidery thread, by the numbers
  3. Why "No. 100" sounds finer than 40 wt and is not
  4. Why "too weak and too thick" keeps circulating
  5. The real differences: finish and lint
  6. When sewing thread works
  7. When it does not
  8. How to run sewing thread in an embroidery machine
  9. Where these numbers stop applying

The short answer: yes, and size is not the problem

Regular all-purpose polyester sewing thread runs in an embroidery machine. It is not much thicker than embroidery thread: the two common all-purpose threads are sold as Tex 30, and a standard 40 wt polyester embroidery thread works out to Tex 27. What changes is the surface. Embroidery thread is a smooth continuous filament made to shine; all-purpose thread is built for seams, and on the core-spun kind the outside is spun polyester, which looks flatter and sheds more lint. That decides where you can use it: anywhere the stitching is open and the shine does not matter, and not in large, dense satins.

Sewing thread vs embroidery thread, by the numbers

Tex is the weight in grams of 1,000 m of thread, so it compares any two threads whatever system the label uses. Madeira gives its counts in dtex (grams per 10,000 m); divide by 10 for Tex. Polyneon 40 is dtex 135 x 2, two strands of 135, so 270 dtex, which is Tex 27. That matches the Tex 25 to 27 the thread weights guide gives for 40 wt.

Published counts, construction and needle sizes: all-purpose sewing thread against 40 wt embroidery thread
ThreadFiber and constructionCountTexNeedle the maker namesBreaking force
Madeira Polyneon 40 (embroidery)100% polyester filamentdtex 135 x 22760/8 to 75/11About 1200 cN
Madeira Classic 40 (embroidery)100% viscose (rayon) filamentdtex 135 x 22765/9 to 75/11About 580 cN
Gütermann Sew-all No. 100 (all-purpose)100% polyester, Micro Core TechnologyTicket No. 10030NM 70 to 90 for machine embroideryNot on the pages checked
Coats Dual Duty XP General Purpose (all-purpose)Polyester filament core, wrapped and twisted with spun polyesterNot stated3070 to 80Not on the pages checked
Coats Dual Duty XP FineCore-spun line, finer than General PurposeNot statedNot stated60 to 70Not on the pages checked

Tex 30 against Tex 27 is 11 percent more polyester per meter. Thickness grows with the square root of that, so for the same fiber packed the same way the sewing thread is roughly 5 percent wider. That is a smaller step than going from 40 wt to 30 wt, and nothing like the jump to 12 wt. Treat it as a size class, not a caliper reading: construction changes how a thread sits in the stitch.

If you want a sewing thread line that is actually finer than embroidery thread, Coats makes one: QuiltSocial's guide to Dual Duty XP calls the Fine weight, run on a 60 to 70 needle, "Excellent for Machine Embroidery". No Tex figure for it was published on the pages checked.

Why "No. 100" sounds finer than 40 wt and is not

The spool says No. 100 and the embroidery cone says 40, so it is easy to read sewing thread as the finer one. It is the other way round, slightly. The two numbers come from different counting systems and cannot be compared with each other; St. Louis Art Supply, describing Sew-all, even calls it "30 tex (100 wt.)", a 100 that has nothing to do with embroidery's 40 wt. Compare Tex to Tex, and the all-purpose thread is the heavier one.

Why "too weak and too thick" keeps circulating

Most pages on this question say sewing thread is not strong enough for the speed and tension of an embroidery machine. None of the sewing thread pages checked here publishes a breaking force, so there is no figure to set against Polyneon's. But look at rayon: Madeira's Classic 40 has the same dtex 135 x 2 count as Polyneon and about half its breaking force, roughly 580 cN against 1200 cN, and rayon 40 was the standard embroidery thread for decades, satins included. Strength alone is not what makes a thread an embroidery thread. The polyester vs rayon comparison covers that trade.

Sailrite's listing describes Dual Duty XP as "a strong, smooth thread", and Gütermann's own Sew-all page names a machine embroidery needle size and promises "uniform supple high-quality embroidery motifs". The thickness and strength warnings persist because they sound right and because the result really does look different. The reason it looks different is the finish.

The real differences: finish and lint

Finish

Madeira lists Polyneon and Classic as filament: long continuous fibers, smooth enough to reflect light in a satin. Coats builds Dual Duty XP from "smooth, long, multi-filament fibers tightly spun as a 'core', then wrapped and twisted with spun polyester", so the part you see is spun polyester. Gütermann does not call Sew-all spun on its page; it describes Micro Core Technology and claims a "subtle, silky sheen". Subtle is the maker's own word, and it is the honest one: next to an embroidery polyester, all-purpose thread reads flatter. The thread types guide explains why filament shines.

Lint

Robison-Anton puts the spun versus filament difference plainly for bobbin thread: spun polyester "has a somewhat 'fuzzy' look to it and will produce more lint", while filament polyester "is smooth, with almost no lint at all". A core-spun top thread wrapped in spun polyester sheds in the same way, into the tension discs and the hook. After a long run with it, clean the bobbin area before the next job.

When sewing thread works

  • Test stitch-outs. Checking hooping, placement, stitch order or a new stabilizer on scrap does not need the good thread. The thread will not tell you how the final sheen looks, so judge that with the real thread.
  • Run-stitch, bean-stitch and redwork designs. Line work lays single rows of stitches side by side with fabric between them, so no satin depends on shine and an 11 percent heavier thread has room.
  • Matching a garment color. When the exact shade you need is on a sewing spool and not in your embroidery box, a small monogram or outline in that thread can beat the nearest embroidery color. If you are matching across brands instead, see thread color conversion.

When it does not

  • Dense satins and large fills. These are the areas digitized for 40 wt spacing and meant to shine. The sewing thread brings 11 percent more polyester into the tightest part of the design and a flatter surface where the light should catch. No maker publishes a density for running all-purpose thread in an embroidery design, so do not guess one.
  • A metallic or high-gloss look. All-purpose thread has no foil and only a subtle sheen. For glint use a metallic thread with its own needle and speed routine.
  • The bobbin. Embroidery bobbin thread is 60 or 90 wt, much finer than Tex 30. A sewing thread bobbin makes a thicker, stiffer back and needs the tension rebalanced; bobbin thread and prewound bobbins explains why.

How to run sewing thread in an embroidery machine

  1. Fit an embroidery needle in Gütermann's range. Gütermann names a machine embroidery needle NM 70 to 90 for Sew-all; Coats gives 70 to 80 for Dual Duty XP General Purpose. Start at 75/11, the top of Madeira's Polyneon range, and keep 80/12 and 90/14 in reserve. The embroidery needles guide covers point and eye.
  2. Leave the design as digitized. An 11 percent heavier thread is not the 30 wt case where the site advises opening the spacing. Stitch first and change density only if the stitch-out shows it.
  3. Check the balance. Run an I-test with the sewing thread on top before the real piece, and adjust top tension only.
  4. Read the stitch-out. Stitches piling up or the needle punching the same spot means the design is too dense for this thread: open it as in stitch density, or switch thread. Fraying close to the eye is thread shredding: go one needle size up within the 70 to 90 range before changing anything else.

Where these numbers stop applying

  • Other sewing threads. The Tex 30 figure is for Sew-all and Dual Duty XP General Purpose. Cotton, heavy-duty and topstitching threads are different sizes; Coats' Heavy line wants a 100 to 110 needle.
  • Other embroidery threads. Tex 27 is Madeira's 40 wt. Other 40 wt brands are close but not identical, as the thread weights guide explains.
  • Your machine's manual. If it names a thread for embroidery mode, follow it.

When a sewing thread run looks wrong, change one thing at a time, needle first, then tension, then thread, as in the stitch-out tuning method.

Frequently asked questions

Is sewing thread thicker than embroidery thread?

Only slightly. Gütermann Sew-all and Coats Dual Duty XP General Purpose are Tex 30; Madeira's 40 wt Polyneon is dtex 135 x 2, which is Tex 27. That is about 11 percent more weight per meter and roughly 5 percent more width. The bigger difference is the finish.

Is No. 100 sewing thread finer than 40 wt embroidery thread?

No. The two numbers belong to different systems. Compared in Tex, Gütermann Sew-all No. 100 is Tex 30 and a 40 wt embroidery thread is Tex 27, so the sewing thread is the slightly heavier one. See thread weights.

What needle should I use with sewing thread in an embroidery machine?

An embroidery needle in Gütermann's NM 70 to 90 range for Sew-all; Coats gives 70 to 80 for Dual Duty XP General Purpose. Start at 75/11 and go up a size if the thread frays at the eye.

Can I use sewing thread in the bobbin for embroidery?

You can, but dedicated 60 or 90 wt bobbin thread is much finer than Tex 30 sewing thread, so a sewing thread bobbin makes a stiffer back and needs the tension rebalanced. See bobbin thread and prewound bobbins.

Sources and further reading

Found something wrong or out of date? Tell us and we will fix it.