Brother PE900 vs PE800: what is different?

Both machines' Brother pages and manuals in one table, the screen figure that is not what it seems, the hoop question, and the review-site claims checked.

Updated 8 min read Reviewed against our editorial standards

Quick answer

Same 5 x 7 in field and the same 650 stitches per minute. The PE900 adds wireless LAN (PC and Artspira app), automatic jump stitch trimming, Color Sort, 193 designs against 138 and 13 fonts against 11. Brother now marks the PE800 Discontinued. Buy a discounted PE800 if a USB stick and some snipping suit you; buy the PE900 for Artspira and wireless.

On this page
  1. Key takeaways
  2. The two machines, and the terms that decide this
  3. PE900 vs PE800 side by side
  4. What the PE900 adds
  5. Is the PE900 screen really bigger?
  6. Do PE800 hoops fit the PE900?
  7. What shop and review pages claim, checked against Brother
  8. Worked example: one monogram on each machine
  9. Who should buy a discounted PE800, and who needs the PE900
  10. What this does not cover

Key takeaways

  • The PE900 and PE800 stitch the same 5 x 7 in field (180 x 130 mm) at the same top speed, 650 stitches per minute.
  • The PE900 adds wireless LAN. Designs can come from a Windows PC or from Brother's Artspira phone app with no USB stick. The PE800 takes designs by USB stick only.
  • The PE900 trims jump stitches inside a color on its own. The PE800 cuts only at the end of each color, so you snip the jumps by hand.
  • The PE900 has 193 built-in designs and 13 fonts. The PE800 has 138 and 11. Brother USA now marks the PE800 Discontinued.
  • The screen gap is smaller than the numbers suggest. Brother gives the PE800 screen as 3.2 x 1.8 in, and that measures about 3.7 in corner to corner, the PE900's figure.

The Brother PE900 and PE800 stitch the same 5 x 7 in field, at the same 650 stitches per minute. The PE900 adds wireless LAN, the Artspira app, automatic jump stitch trimming and Color Sort. It also has 193 built-in designs against 138, and 13 fonts against 11. Brother USA's PE800 page is now marked Discontinued. Brother lists the PE900 at $1,179.99, and the old PE800 page still shows $779.99. So a PE800 is the same size of machine with fewer conveniences. Two questions decide whether those are worth the gap: do you make designs on a phone, and will you snip threads by hand?

The two machines, and the terms that decide this

Both are Brother home embroidery machines with one needle. Brother's PE900 page calls it embroidery-only, meaning it has no sewing stitches; see combo vs embroidery-only. Five terms carry the comparison.

  • The embroidery field is the largest area the needle can reach in one hooping. Both manuals give a maximum design size of 180 x 130 mm, which is 7 x 5 in. See sew field.
  • Wireless LAN means the machine joins your home Wi-Fi. The PE900 manual says it needs a 2.4 GHz network.
  • A jump stitch is a loose thread the machine leaves when it moves from one part of a design to another without stitching, in the same color. Jump stitch trim means the machine cuts that thread itself. End color trim means it cuts only when a color is finished.
  • Artspira is Brother's app for phones and tablets. Brother says you can download patterns or draw your own, then send them to the PE900 wirelessly.
  • Discontinued is the label Brother USA now puts on the PE800 page. The PE900 page carries no such label, and Brother's page data gives its status as New.

PE900 vs PE800 side by side

Every row comes from Brother: the two product pages on brother-usa.com, the two Operation Manuals, and the PE800 Quick Reference Guide.

Brother PE900 vs PE800, as Brother lists them
SpecPE900PE800Where Brother says so
Status and list priceCurrent, $1,179.99Discontinued, page still shows $779.99Product pages
Embroidery field5 x 7 in (180 x 130 mm)5 x 7 in (180 x 130 mm)Product pages; both manuals
Top speed650 stitches per minute650 stitches per minutePE900 manual; PE800 page specs
Built-in designs193138Product pages
Built-in fonts1311Product pages
Screen3.7 in LCD3.2 x 1.8 in color touch LCDProduct pages
Wireless LANYesNoPE900 manual; product pages
Artspira appYesNot listedPE900 page
USBUSB flash drive portUSB flash drive portBoth manuals
File types.pes, .phc, .dst, .pen.pes, .phc, .dstBoth manuals
Thread trimmingEnd color trim and jump stitch trimEnd color trim onlyBoth manuals
Color SortYesNot in the manualPE900 page and manual
Hoop in the boxLarge frame, 7 x 5 in (18 x 13 cm)SA444, 7 x 5 in (18 x 13 cm)PE900 page; PE800 guide
Other frames on the frame list4 x 4 in, 1 x 2.5 in, 4 x 7 in magneticSA443 4 x 4 in, SA442 1 x 2.5 in, SA445 extra large 12 x 5 in (multi-position)Both manuals; PE800 guide

One oddity: the spec table lower on Brother's PE800 page gives 7 "lettering alphabet fonts", while the same page says 11 fonts twice. We use 11, the figure Brother puts in its headline features.

What the PE900 adds

Wireless LAN and Artspira

This is the main difference. The PE900 manual lists two ways to send a design over Wi-Fi: Brother's free Windows program, Design Database Transfer, or PE-DESIGN version 11 or later. Brother's PE900 page adds the Artspira app, where you draw or download a pattern on a phone and send it to the machine. Brother's footnote says compatibility "may vary by device and operating system".

The PE800 has none of this. Designs reach it on a USB flash drive, and Brother's PE800 page never mentions Artspira. Transferring designs covers USB sticks and wireless setups in general.

Jump stitch trimming

The PE900 manual says its thread trimming function "will automatically trim any excess thread jumps within the color". It is on when the machine arrives. You can also set a length below which it leaves a jump alone. At 25 mm, for example, it skips any jump of 25 mm or less. The manual says not to use it with the small 1 x 2.5 in frame, because the presser foot may strike the frame.

The PE800 manual describes only End Color Trim, which cuts the thread when each color finishes. Its embroidering steps end with an instruction to you: "Cut the excess thread jumps within the color." That is scissors work. For how long a jump can be before it should be cut, see jump stitch trim length.

Color Sort, designs, fonts and .pen files

Color Sort changes the order a multi-color design stitches in, so you change thread less often. The PE900 page lists it and its manual explains it. The PE800 manual has no such feature. The PE900 also has 55 more built-in designs and two more fonts. It reads one more file type, .pen, on top of the .pes, .phc and .dst that both machines read. Embroidery file formats explains the common types.

Is the PE900 screen really bigger?

Not on Brother's own figures. Brother gives the PE800 screen as 3.2 x 1.8 in, a width and a height. It gives the PE900 screen as 3.7 in, one number with no second side. Screens sold by one number are usually measured corner to corner. A 3.2 x 1.8 in screen is about 3.7 in on that diagonal. (3.2 squared plus 1.8 squared is 13.48, and its square root is 3.67.) So "3.7 in vs 3.2 in" sets a diagonal against a width. Brother's pages do not show that the PE900 screen is larger.

Do PE800 hoops fit the PE900?

Brother confirms only one hoop for both by name: the SAMF180N 4 x 7 in magnetic frame. Its page lists the PE800 and the PE900 among the machines it fits. (Whether a magnetic frame is worth it is on magnetic vs standard hoops.) For the PE800's other hoops, Brother's papers point the same way but stop short of saying so.

  • Same sizes. Both machines come with a 7 x 5 in (18 x 13 cm) hoop. The rest of the PE900 manual's frame list is 10 x 10 cm and 2 x 6 cm, plus the 18 x 10 cm magnetic frame. The PE800's SA443 and SA442 are 10 x 10 cm and 2 x 6 cm.
  • Same fitting. Both manuals give the same steps. You hold a lever on the frame holder to the left, line up two pins with the frame's mounting brackets, and press until it clicks. A notch on the frame sits under a bend in the lever.
  • No part codes. The PE900 Operation Manual and Quick Reference Guide give no SA or EF code for any hoop. Brother USA's SA444 and SA443 pages list neither the PE900 nor the PE800.

So do not take a seller's word that a PE800 hoop set fits a PE900. Ask a Brother dealer to confirm the part code, or read the Included Accessories sheet that comes with the PE900. One frame does not carry over on the frame list. The PE800 lists the SA445 extra large (multi-position) frame, which covers 12 x 5 in by moving the hoop on the arm. The PE900 manual's frame list has no extra large frame at all. Brother hoop compatibility explains Brother's hoop families and how to check any code.

What shop and review pages claim, checked against Brother

Two pages turn up for this search. Sewing Machine Fun's "The 7 Best Brother Embroidery Machines" was last updated December 19, 2023. Swing Design, a Brother dealer, sells the PE900 and runs a public question and answer page. Both link to products they sell or earn from.

Claims about the PE900 and PE800, and what Brother's own pages say
ClaimWho makes itWhat Brother says
PE800: 5 x 7 in field, 138 designs, 650 spm, USB portSewing Machine FunSupported by the PE800 page
The PE800 "still hasn't been discontinued"Sewing Machine FunOut of date: Brother now marks it Discontinued
PE900: 193 designs, 13 fonts, 3.7 in screen, 650 spm, Wi-Fi or USBSewing Machine Fun; Swing DesignSupported by the PE900 page and manual
The PE900 adds automatic jump stitch trimmingSewing Machine Fun; Swing DesignSupported: in the PE900 manual, absent from the PE800 manual
The PE900 is "the newest Brother 5x7 embroidery-only machine"Sewing Machine FunNo source given, and Brother's pages do not say it
The PE900 is the "successor to the Brother PE800"Swing DesignNo source given; Brother's PE800 page names no replacement
The PE900 is the "best reviewed embroidery only machine"Swing DesignNo source given
The difference is hoop size, 4 x 4 in vs 5 x 7 inSwing Design answers pageTrue for the PE545, not the PE800

The last row needs a word. Swing Design's answer page shows up when people search for this comparison. But the question "What's the difference between this and PE900 model?" was asked on a PE545 bundle. The store's answer compares the PE545's 4 x 4 in hoop with the PE900's 5 x 7 in. It does not apply to the PE800, which has the same field as the PE900.

Worked example: one monogram on each machine

Take a three-letter monogram in one color, with the letters set apart. Suppose you bought it as a .pes file. Here is how each machine handles it, by the steps in the two manuals.

  1. Getting the file in. On the PE800 you copy the .pes file to a USB stick and plug it in. On the PE900 you can do the same, or send it from a Windows PC with Design Database Transfer. If you had drawn the letters in Artspira instead, only the PE900 could receive them over Wi-Fi.
  2. Stitching. The needle finishes the first letter and travels to the second, leaving a jump. On the PE900, jump stitch trim cuts it if it is longer than your set length. On the PE800 the thread stays, and the same happens between the second and third letters.
  3. End of the color. Both machines stop. With End Color Trim on, both cut the thread.
  4. Finishing. On the PE800 you now snip two jumps on top of the fabric, as its manual tells you to. On the PE900 there is nothing to cut, unless a jump was under your set length.

On a five-color design with jumps in every color, the PE800 snipping repeats for each color. That chore, and the phone app, are what the $400 between Brother's two listed prices buys. Stitch speed and design size stay the same.

Who should buy a discounted PE800, and who needs the PE900

A discounted PE800 makes sense if you buy designs or make them on a computer and are happy to carry them on a USB stick. It also suits mostly single-color work with few jumps. And it is the one with the extra large multi-position frame on Brother's list. Ask the seller what warranty comes with a discontinued machine.

Buy the PE900 if you want Artspira on a phone, or want to send files from a PC without a stick. It is also the pick for frequent lettering and multi-color work, since every jump on a PE800 is a snip. And it is the model Brother still sells as current.

If 5 x 7 in may be too small, neither machine fixes that. How to choose a machine walks through field size, and hoop sizes shows what fits in each hoop.

What this does not cover

This page compares Brother USA's listings and the US manuals. Other countries' versions can differ in included items and prices. We did not stitch on either machine, so nothing here rates stitch quality, noise or how long a machine lasts. Prices are Brother's list prices on the day we checked, and dealer prices differ. Brother does not confirm that the PE800's SA44x hoops fit the PE900, so check the part code before buying hoops. Artspira's features and the machine software are Brother's to change; firmware updates explains how updates reach a machine. For a used PE800, its condition matters more than anything on this page.

Frequently asked questions

Is the PE900 hoop size bigger than the PE800?

No. Both have a 5 x 7 in field, and both manuals give a maximum design size of 180 x 130 mm. Each comes with a 7 x 5 in hoop in the box.

Can I use Artspira with a PE800?

Not to send designs to the machine. Brother says Artspira transfers designs wirelessly and needs a wireless network, and the PE800 has no wireless LAN. Brother's PE800 page does not mention Artspira.

Does the PE800 cut jump stitches?

No. The PE800 cuts the thread at the end of each color (End Color Trim). Its manual tells you to cut the jumps within a color yourself. The PE900 trims them on its own, above a length you set.

Is the PE800 discontinued?

Brother USA's PE800 page is marked Discontinued, and Brother's page data gives its status the same way. The PE900 page is not marked, and its status is New.

Is the PE900 faster than the PE800?

No. Brother gives both a top speed of 650 stitches per minute: in the PE900 manual's specifications and in the spec data on the PE800 page.

Sources and further reading

Found something wrong or out of date? Tell us and we will fix it.