Brother hoop compatibility: do PE800 hoops fit an SE600?
What the PE800 and SE600 manuals list, what Brother's hoop pages list, and why two hoops both called 4x4 are not the same hoop.
Quick answer
No. Brother does not list any PE800 hoop for the SE600. The PE800 uses the SA44x family: SA444 (5x7), SA443 (4x4), SA442 (small) and SA445 (extra large). The SE600 uses the SA43x family: SA432 (4x4), SA434 (large) and SA431 (small). The two families clip on in different ways. Match the part code to your machine, not the size.
On this page
Key takeaways
- PE800 hoops do not fit an SE600, and Brother lists no hoop that works on both machines.
- Brother home hoops come in families. The SE600 uses the SA43x hoops (SA432, SA434 and SA431), and the PE800 uses the SA44x hoops (SA444, SA443, SA442 and SA445).
- Both machines have a hoop called 4x4, but they are different hoops: the SE600's is the SA432 and the PE800's is the SA443.
- The two families clip on in different ways. The SE600's frame has tabs that click into slots, while the PE800's frame presses onto two pins and is held by a lever.
- Match the part code, not the size. Check it in your machine's own manual or Quick Reference Guide, since Brother's shop pages leave models out.
No, PE800 hoops do not fit an SE600, and Brother does not list a single hoop for both machines. The PE800's guide lists the SA444, SA443, SA442 and SA445. The SE600's manual lists a 4x4 frame in the box, plus the SA434 and SA431 as extras. Brother's own hoop pages agree with the manuals. The SA432 4x4 page lists the SE600 but not the PE800, and the SA443 4x4 and SA444 5x7 pages list neither.
First, the terms. A hoop holds the fabric tight and clips onto the machine's embroidery arm, which moves it under the needle, and Brother's manuals call it an embroidery frame. The embroidery field is the area the needle can reach inside it; see sew field. Hoop compatibility means two things at once: the hoop has to lock onto your machine's arm, and your machine has to know that hoop and allow its field. Brother tells you which hoops pass both tests with a part code. In the Americas the codes start with SA, such as SA444, and elsewhere the same hoop has an EF code, such as EF84.
The hoops for each machine
Each row below comes from Brother's own papers: the PE800 Operation Manual and Quick Reference Guide, the SE600 Operation Manual, and Brother USA's hoop pages.
| Hoop | Field | SE600 | PE800 | Where Brother says so |
|---|---|---|---|---|
| SA432 medium | 4 x 4 in (10 x 10 cm) | Yes, a 4x4 frame comes in the box | Not listed | SA432 page; SE600 manual |
| SA434 large (EF71) | 6.75 x 4 in (17 x 10 cm), 4 x 4 in at a time | Yes, sold separately | Not listed | SE600 manual; SA434 page |
| SA431 small (EF61) | 1 x 2.5 in (2 x 6 cm) | Yes, sold separately | Not listed | SE600 manual |
| SA444 large (EF84) | 7 x 5 in (18 x 13 cm) | Not listed | Yes, in the box | PE800 guide; SA444 page |
| SA443 medium (EF83) | 4 x 4 in (10 x 10 cm) | Not listed | Yes, sold separately | PE800 guide; SA443 page |
| SA442 small (EF82) | 1 x 2.5 in (2 x 6 cm) | Not listed | Yes, sold separately | PE800 guide |
| SA445 extra large (EF85) | 12 x 5 in (30 x 13 cm), 7 x 5 in at a time | Not listed | Yes, sold separately | PE800 manual and guide |
| SAMF180N magnetic | 4 x 7 in | Not listed | Yes | SAMF180N page |
"Not listed" means Brother names that hoop for one machine and not the other, in the manual and on the hoop's page. No row is shared, because each machine has its own small, medium and large hoop.
Two Brother hoop families
Brother USA's hoop pages each carry a "For use with" list, and read side by side, they split into two groups.
- The SA43x family. The SA432 4x4 lists the PE-300S, PE500, PE525, PE540D, SE270D, SE350, SE400, SE425, SE600 and SE625, among others. The SA434 large hoop lists the PE-270D, PE-300S and PE-400D, the same PE500 to PE540D models, and the same SE models. The SA432 does not list the PE535, PE800, SE1900 or NQ1700E.
- The SA44x family. The SA443 4x4 and SA444 5x7 both list the PE700, PE700II, PE750D, PE770, PE780D, Designio DZ820E, Innov-is 1000, NS1150E and Simplicity SB7900E. The SA443 also lists the PC6500, PC-8200 and PC-8500, among others.
The PE800 is on neither SA44x page. But its own Quick Reference Guide gives the SA444 as the hoop in the box, and the SA443, SA442 and SA445 as extras. So the PE800 belongs with the PE770 group. Brother's magnetic frame points the same way: the SAMF180N lists the PE800, PE900, SE1900, SE2000, NS1250E and NS2850D, and says it is for 5x7 machines.
How each hoop clips on
The two manuals show why the families do not mix. On the SE600, you line up the frame guide tabs on the hoop with the slots in the carriage's frame holder, then push in until it clicks. On the PE800, you hold a lever on the frame holder to the left, then press the hoop's front and back mounting brackets onto two pins. A notch on the hoop must sit under a bend in the lever. These are two different fittings.
Why people think they fit
Two plausible answers circulate. One says Brother hoops are shared across its home machines, and the other says they are not. For these two machines the second is right, and the first comes from three things.
- Two hoops share a name. The SA432 and the SA443 are both sold as a Brother 4x4. A seller who sees "Brother 4x4 hoop" may assume it fits any Brother with a 4x4 field, and it does not.
- The shop lists are incomplete. Brother USA's SA443 and SA444 pages leave out the PE800, even though its guide lists both. Brother Canada's SA443 page names only two machines, the NS2750D and NS1150E. When the official list is patchy, guesses fill the gap.
- Families really are shared, within a family. The SE600 shares its hoops with the SE400, SE625 and others, and the PE800 shares with the PE770 group. That is true, and it gets stretched to cover every Brother.
Our hoop sizes page says the same in general: many Brother and Baby Lock models share hoop families, but match the hoop to your model before buying.
Worked example: a used PE800 hoop set and an SE600
Suppose you own an SE600, and a friend is selling a PE800 hoop set: a 5x7 and a 4x4. Here is how Brother's papers settle it.
- Get the part codes. Ask which hoops they are. For a PE800, the 5x7 in the box is the SA444 and the extra 4x4 is the SA443.
- Check the SE600 manual. Its list of extras gives two frames, the SA434 and the SA431, and the 4x4 frame comes in the box. Neither SA444 nor SA443 appears.
- Check the hoop pages. The SA444 page lists the PE700 to PE780D group, not the SE600, and the SA443 page does the same.
- Check the field. The SE600 manual gives its embroidery area as 10 x 10 cm (4 x 4 in). Even if a 5x7 hoop could be fitted, the machine is not made to stitch a 5x7 field.
- Check the fitting. The SE600 takes a hoop with guide tabs that click into slots, while the PE800 hoops are built for two pins and a lever.
So both hoops fail, even the 4x4. What the SE600 can use for a longer design is the SA434. Its manual says it covers a 17 x 10 cm (6.75 x 4 in) area without rehooping, by moving the frame to a new position on the arm. Each position still stitches 10 x 10 cm. For a design larger than that, see embroidering a design larger than your hoop.
How to check any Brother hoop
- Find your machine's own list. Look at the optional accessories page of the Operation Manual, or the Quick Reference Guide; both are free on Brother's support site under your model. The PE800 manual sends you to its Quick Reference Guide for part codes.
- Get the hoop's part code. Use the SA code in the Americas or the EF code elsewhere, because a size alone, such as "4x4," is not enough.
- Match the code, not the picture. If the code is in your machine's list, it fits. If it is only on a shop page, check that the page names your exact model.
- Check the field. Your machine sets the largest design it will stitch, whatever the hoop, and the hoop size checker tells you which field a design needs.
- Pick the hoop on screen. Both manuals have you choose the frame on the screen, and they show which frames a design can use. If a design runs past the frame, the SE600 shows a message saying so; hoop and design errors covers those messages.
Moving up from an SE600 to a PE800
The same facts work in reverse: SE600 hoops are not listed for the PE800, so plan to buy PE800 hoops. The PE800's accessory list shows the SA444 5x7 as its only hoop in the box. For smaller pieces, its guide lists the SA443 4x4 and SA442 small hoops. A smaller hoop holds fabric tighter, which how to choose the right hoop explains. If you are weighing a magnetic frame, the SAMF180N is the one Brother lists for the PE800. Magnetic vs standard hoops covers the trade-off, and magnetic hoops and pacemakers covers the safety side. A 4x4 design library still stitches in the PE800's 4x4 hoop, and resizing designs explains when a larger version needs the original file. How to choose a machine covers field size as a buying factor. If you are deciding between a PE800 and the newer PE900, Brother PE900 vs PE800 covers what changed and what Brother says about their hoops.
What this does not cover
This page covers Brother's own hoops on the SE600 and PE800 in North America. It does not cover third-party hoops, which are sold with their own model lists. Nor does it cover Baby Lock machines, Brother's multi-needle PR hoops, or Brother models we did not check against a manual. Brother's lists can change, and they differ by country, since the US and Canadian SA443 pages name different machines. Before you buy, check your own machine's manual, and ask your Brother dealer if a code is not listed. If a hoop does not click into place the way your manual shows, do not stitch with it. A hoop that fits but sits off-center is a separate problem; see embroidery not centered in the hoop.
Frequently asked questions
Will a 5x7 hoop work on my SE600?
No Brother 5x7 hoop is listed for the SE600. Its manual gives an embroidery area of 10 x 10 cm (4 x 4 in), even with the optional large frame. The SA444 5x7 hoop is listed for the PE770 family, and the PE800's own guide lists it too, not the SE600.
Do SE600 hoops fit a PE800?
No. The SA432 4x4 and SA434 large hoop pages do not list the PE800, and the PE800 guide lists the SA443 as its 4x4 hoop instead. If you are moving up from an SE600 to a PE800, plan on buying PE800 hoops.
What is the difference between the SA432 and SA443?
Both are Brother 4x4 hoops, but they are for different machines. The SA432 is listed for the SE600, SE625, SE400, PE500 and PE540D, among others. The SA443 is listed for the PE700 to PE780D, DZ820E, NS1150E and others, and the PE800 guide lists it as its optional 4x4.
Which magnetic hoop fits a PE800?
Brother's SAMF180N 4x7 magnetic frame lists the PE800, PE900, SE1900, SE2000, NS1250E and NS2850D. It does not list the SE600. Read the magnetic hoop and pacemaker page before buying one if anyone in the house has a heart device.
Why is the PE800 missing from Brother's SA443 and SA444 pages?
We could not find out. The lists on Brother USA's hoop pages are not complete, and Brother Canada's SA443 page names only two machines. The PE800's own Quick Reference Guide does list both hoops, and the machine's own manual is the better source.
Sources and further reading
- Brother: PE800 Operation Manual (888-L90/L91/L93/K90/K92) Included 18 x 13 cm frame; optional extra large (multi-position), medium and small frames; frame mounts on two pins with a lever
- Brother: PE800 Quick Reference Guide Part codes: SA444 (EF84) large, SA445 (EF85) extra large, SA443 (EF83) medium, SA442 (EF82) small
- Brother: SE600 Operation Manual (888-M20) Medium 10 x 10 cm frame included; optional SA434 (EF71) large and SA431 (EF61) small; embroidery area 10 x 10 cm; frame guide tabs click into carriage slots
- Brother USA: SA432 4 x 4 embroidery hoop For use with list: PE-300S, PE500, PE525, PE540D, SE270D, SE350, SE400, SE425, SE600, SE625 and others
- Brother USA: SA434 6.75 x 4 large embroidery hoop For use with list includes PE-270D, PE-300S, PE-400D, PE500 to PE540D and SE270D to SE625
- Brother USA: SA443 4 x 4 embroidery hoop For use with list: PE700 to PE780D, DZ820E, Innov-is 1000, 1200, 1250D, NS1150E, PC6500, PC-8200, PC-8500, SB7900E
- Brother USA: SA444 5 x 7 embroidery hoop For use with list: PE700 to PE780D, DZ820E, Innov-is 1000, NS1150E, SB7900E
- Brother USA: SAMF180N 4 x 7 magnetic frame Compatible with PE800, PE900, SE1900, SE2000, NS1250E and NS2850D
- Brother Canada: SA443 small embroidery frame Lists only the NS2750D and NS1150E
Found something wrong or out of date? Tell us and we will fix it.