CPSIA and embroidered kids' clothes: does embroidery thread need lead testing?
Plain thread is an exempt textile. Metallic thread, snaps, zippers and heat transfer vinyl are not. Here is the rule behind each part, what Small Batch status changes, and what no exemption removes.
Quick answer
No. Dyed polyester, rayon and cotton thread are textiles that 16 CFR 1500.91(d)(7) says do not exceed the lead limits, so they need no lead test. Metallic thread, snaps, zippers, buttons and heat transfer vinyl must meet 100 ppm total lead, and paint 90 ppm. You still need a Children's Product Certificate, a permanent tracking label and the 16 CFR 1610 flammability rule.
On this page
Key takeaways
- Plain embroidery thread does not need lead testing. Dyed polyester, rayon and cotton thread fall under the textile rule in 16 CFR 1500.91(d)(7), which says dyed or undyed fibers do not exceed the lead limits.
- The other parts do need proof. CPSC names metallic thread, snaps, zippers, buttons and heat transfer vinyl as parts that must meet the 100 ppm total lead limit. Paint and screen printing must meet 90 ppm.
- Small Batch status (under $1,436,864 in sales and 7,500 units, registered every calendar year) lets you check total lead yourself. Lead in paint still goes to a CPSC-accepted lab.
- No exemption removes the Children's Product Certificate or the tracking label. A hangtag or a sticker is not a permanent label on clothing.
- Kids' clothing must also meet the clothing flammability rule, 16 CFR part 1610. Many fabrics are exempt from testing under it.
No, plain embroidery thread does not need lead testing under the CPSIA. A federal rule, 16 CFR 1500.91(d)(7), lists textiles made of natural fibers and manufactured fibers, "dyed or undyed", as materials that do not go over the lead limits. Polyester, rayon and cotton are all on its lists. The parts around the thread are different. CPSC's clothing page names metallic thread, snaps, zippers, buttons and heat transfer vinyl as parts that must meet the 100 ppm total lead limit. The thread exemption also does not lift the other duties of a seller: a certificate, a permanent tracking label and the clothing flammability rule.
First, the terms. The CPSIA is the Consumer Product Safety Improvement Act, the 2008 US law behind these rules. CPSC, the Consumer Product Safety Commission, enforces it. A children's product is one "primarily designed or intended for children 12 years of age or younger", so baby clothes and kids' sizes count. Total lead content is the lead in the material itself: in a snap's metal, a thread's metal foil or a vinyl film. The limit is 100 parts per million (ppm), or 0.01 percent. Lead in paint is a separate limit for paint and similar coatings on the surface: 90 ppm. Third-party testing means a lab that CPSC has accepted runs the test, not you. A Children's Product Certificate (CPC) is a document in which the maker states which rules the item meets and what evidence shows it.
What the rule says about thread
The thread answer comes from a list in 16 CFR 1500.91. CPSC made a "determination" that some materials never go over the lead limits, so they do not need lead tests. Item (d)(7) on that list is textiles. It names natural fibers such as cotton, silk and wool, and manufactured fibers such as rayon, polyester, nylon and acrylic. Both groups are marked "(dyed or undyed)".
CPSC's total lead page backs this up in plain words: "Dyes are not considered to be a material that may introduce lead into a material." So a bright red polyester thread is in the same place as an undyed one. Standard machine embroidery thread is polyester or rayon, and both are on the list; embroidery thread types covers what each is made of, and polyester vs rayon thread how they differ in use.
The rule has two conditions, and they decide every edge case.
- Dyes only. The textile item excludes "any textiles that contain treatments or applications that do not consist entirely of dyes." A fiber with something else added to it is no longer on the list.
- Not changed later. The whole list applies only if the material has not been "treated or adulterated" with something that could add lead. If a later step adds such a material, the item has to meet the limit on its own evidence.
The exemption is from testing, not from the paperwork. CPSC's total lead page says firms "are still expected to certify compliance with the total lead content requirement in a CPC." You list the thread on the certificate and name the textile rule as your basis.
Which parts of an embroidered garment need lead proof
Read a finished piece one part at a time. CPSC's limit applies to "any accessible component part", and each part has its own answer.
| Part | Lead rule | Why |
|---|---|---|
| Polyester, rayon or cotton thread, dyed | No lead test needed; list it on the CPC | Textile, dyed or undyed (1500.91(d)(7)) |
| Cotton or polyester garment fabric, dyed | No lead test needed; list it on the CPC | Same textile item; CPSC's clothing page applies it to textiles |
| Metallic thread | 100 ppm total lead | Named on CPSC's clothing page: "metallic threads/fibers" |
| Snaps, zippers, buttons | 100 ppm total lead; 90 ppm on any paint | Named on CPSC's clothing page for both limits |
| Heat transfer vinyl | 100 ppm total lead | Named on CPSC's clothing page |
| Screen printing | 90 ppm lead in paint | Named on CPSC's clothing page as a coating that hardens |
| Twill or patch fabric with an adhesive coating | Not covered by the textile item; needs its own evidence | The coating is an application that is not a dye (1500.91(d)(7)) |
The last row is the one the thread answer hides. Some tackle twill comes with an adhesive coat on the back, which is what lets it be heat tacked before sewing (see tackle twill stitch width). A patch backed with heat seal film, as in heat press settings for patches, carries a glue layer too. CPSC's clothing page does not name these. The rule text does settle one thing: a textile with a non-dye application is outside the textile item. So it needs evidence like any other part, such as a test report or a written statement from the supplier.
Metallic thread is the part embroiderers miss most often, because it sits on the same cone stand as the polyester. It is built differently: a core wrapped in metallized foil, or a ribbon slit from metallized film, as metallic thread explains. CPSC lists it apart from the plain fibers.
What Small Batch status changes
CPSC's Small Batch program cuts the testing burden for small makers. It does not change the limits. You qualify when both of these are true:
- Your total gross revenue from all consumer products in the prior calendar year was $1,436,864 or less.
- You made no more than 7,500 units of the product in the prior calendar year.
You must register on SaferProducts.gov, and the registration lasts one calendar year. CPSC's Small Batch FAQ says: "Registration will be required every calendar year."
CPSC sorts the rules into two groups. Group A gets no relief. It includes "lead in paint and similar surface coating", so painted snaps or screen printing must still be tested by a CPSC-accepted lab. Group B includes total lead content, wearing apparel (16 CFR part 1610) and children's sleepwear. For Group B, a registered small batch maker may use "first-party testing conducted in-house," a lab CPSC has not accepted, or "a written statement of assurance from a supplier."
Two common beliefs about small batch are both wrong. It does not mean handmade items are exempt. It also does not mean every part needs a lab. The FAQ is direct: "A Small Batch Manufacturer must always certify its children's products as compliant." What changes is who may do the Group B testing.
Certificate, tracking label and flammability
The Children's Product Certificate
CPSC's clothing page says domestic manufacturers or importers "must generate a Children's Product Certificate (CPC)" and make sure a CPC accompanies the product in distribution. The Small Batch FAQ suggests putting your registration number in section 7 of the CPC.
The tracking label
Children's products must carry permanent marks on the product and its packaging. The marks name the maker or private labeler, the place and date of making, and batch or run details. CPSC's tracking label FAQ is blunt on two points. First: "There is no exemption or exception from the tracking label requirement based on the size of the business." Second, for clothing and other textiles: "Hangtags and adhesive labels are not permanent for these products." A permanent mark is one that can "reasonably be expected to remain on the product during the useful life of the product."
Flammability
Clothing textiles must meet 16 CFR part 1610. CPSC's clothing page lists fabrics that are "exempt from testing requirements" under it:
- Plain surface fabrics weighing 2.6 ounces per square yard (88.2 g per square meter) or more, whatever the fiber.
- Plain and raised surface fabrics made of acrylic, modacrylic, nylon, olefin, polyester, wool, or any mix of these, at any weight.
Garments that use vinyl plastic film fall under 16 CFR part 1611. Children's sleepwear has its own, stricter rules: 16 CFR parts 1615 and 1616.
Worked example: a name on a baby bodysuit
Take one product and walk it through the rules. Suppose you buy plain 100% cotton baby bodysuits with metal snaps. You stitch a name in polyester thread on the chest and add a small star in gold metallic thread. (Left chest placement gives sizes and positions for small garments.) A cutaway backing stays inside. You sell a few hundred a year, so you register as a small batch maker.
- The polyester name thread. Dyed manufactured fiber, item (d)(7). No lead test. It goes on the CPC with the textile rule as the basis.
- The cotton body. Dyed natural fiber, the same item. No lead test.
- The gold star. Metallic thread is named on CPSC's clothing page, so it needs evidence that it meets 100 ppm. Total lead is Group B, so as a registered small batch maker you may test it in-house or get a written assurance from the thread supplier.
- The snaps. They need evidence for 100 ppm total lead. If they are painted, the paint needs a 90 ppm test by a CPSC-accepted lab, since lead in paint is Group A. The snaps came on the blank. Whether the blank's maker or you count as the manufacturer for them is a question CPSC's pages here do not answer.
- The backing. CPSC's pages do not name embroidery backing. Ask your supplier what it is made of and whether it has any coating or adhesive. A fusible cover backing, such as the kind in cover backing for itchy stitches, carries glue by design.
- Flammability. Check the blank's fabric weight. A plain cotton knit at 2.6 oz per square yard or more is exempt from 1610 testing. If it is lighter, it is not on the exempt list, and wearing apparel is Group B, so in-house testing to 1610 is allowed.
- The label. A printed hangtag does not count. The tracking marks must be on the bodysuit in a form that lasts its useful life, and on the packaging.
- The certificate. One CPC lists every rule that applies and the basis for each: the textile item for the threads and fabric, your evidence for the metallic thread and snaps, and your 1610 basis.
Note what changed the answer. Swap the gold star for a yellow polyester star and step 3 drops out. Swap the stitched name for heat transfer vinyl and a new 100 ppm part appears.
What this does not cover
This page is not legal advice. It covers US federal rules only, as CPSC states them on the pages listed below; state laws and other countries are not covered. It does not decide whether someone who embroiders a bought blank is the "manufacturer" of the finished item. CPSC's clothing, tracking label, total lead and Small Batch pages do not address that case, and it decides who owes the certificate for parts like snaps. Rules for toys, sleepwear details, drawstrings and small parts are not covered either. Thread with a coating or special finish is outside the textile item; ask the supplier what is on it. If you sell children's items in any volume, read the CPSC pages yourself and ask CPSC or a lawyer about your own case. For wash care that keeps a label and stitching intact, see thread wash and iron temperatures.
Frequently asked questions
Does embroidery thread need to be lead tested for children's clothes?
Not plain thread. Polyester, rayon and cotton thread, dyed or undyed, fall under the textile item in 16 CFR 1500.91(d)(7), so CPSC does not require a lead test. Thread with a non-dye coating or treatment is outside that item. Metallic thread is named by CPSC as needing the 100 ppm total lead limit.
Is metallic embroidery thread CPSIA compliant?
It can be, but it is not covered by the textile exemption. CPSC's clothing page lists metallic threads among the parts that must meet 100 ppm total lead. Get a test report or, as a registered small batch maker, a written assurance from the supplier or your own test. See metallic thread for how it is made.
Do I need a tracking label on handmade baby clothes?
Yes. CPSC says there is no exemption from the tracking label rule based on the size of the business, and that hangtags and adhesive labels are not permanent for clothing and other textiles. The mark has to last the useful life of the garment.
Does Small Batch registration mean I do not need lab testing?
Only for Group B rules, such as total lead content and the 16 CFR 1610 clothing flammability rule. Lead in paint is Group A and still needs a CPSC-accepted lab. You must register every calendar year, and you must still issue a Children's Product Certificate.
If I embroider a store-bought blank, am I the manufacturer?
CPSC's clothing, tracking label, total lead and Small Batch pages do not address that case. It matters because it decides who certifies parts that came on the blank, such as snaps. Ask CPSC or a lawyer about your own setup.
Sources and further reading
- 16 CFR 1500.91, Determinations regarding lead content (Cornell LII) (d) materials that do not exceed the lead limits if not treated or adulterated; (d)(7) textiles of natural and manufactured fibers, dyed or undyed, excluding treatments or applications that are not entirely dyes
- CPSC: Clothing (business FAQ) 100 ppm total lead with metallic threads, snaps, zippers, buttons and heat transfer vinyl as examples; 90 ppm lead in paint, screen printing; textile determination; CPC; tracking labels; 16 CFR 1610 and its exempt fabrics, 1611, 1615 and 1616
- CPSC: Total Lead Content (business FAQ) dyes are not considered to introduce lead; dyed and undyed textiles; exempt materials must still be certified in a CPC
- CPSC: Tracking Label (business FAQ) required contents; no exemption by business size; hangtags and adhesive labels not permanent for textiles
- CPSC: Small Batch (business FAQ) $1,436,864 and 7,500 unit thresholds; registration every calendar year; must always certify; Group A always third party
- CPSC: Small Batch Manufacturers and Third Party Testing Group A list (lead in paint, small parts) and Group B list (total lead content, wearing apparel 16 CFR 1610, sleepwear); first-party testing and supplier assurances for Group B
Found something wrong or out of date? Tell us and we will fix it.